Town of Clarkdale (AZ)

Arizona Authority Having Jurisdiction Solar permitting requirements

NEC Code Version2017

Fire Code Version2018 Building Code

Wet Stamps RequiredDigital Structural,Digital Electrical

Fire Setback Enforced1

Codes

NEC Code Version: 2017

Fire Code Version: 2018 Building Code

Code List: 2018 INTERNATIONAL FIRE CODE 2018 INTERNATIONAL BUILDING CODE 2018 INTERNATIONAL RESIDENTIAL CODE 2018 INTERNATIONAL MECHANICAL CODE 2018 INTERNATIONAL FUEL GAS CODE 2018 INTERNATIONAL ENERGY CONSERVATION CODE 2018 INTERNATIONAL EXISTING BUILDING CODE 2017 NATIONAL ELECTRICAL CODE

ASCE Code Specification: ASCE 7-16

SolarAPP+ & submittal

Revision Required: 1

Rough Inspection: None

New Planset Required For Module Swap: 0

Stamps

Ee Stamp Required On SLD: Yes

Wet Stamps Required: Digital Structural,Digital Electrical

Structural Calculations Required: Yes - Non-Truss

Stamp Location On Plans: Unspecified

Date On Stamps: Expiration Date

Fire setbacks

Fire Setback Enforced: 1

Setback Notes: 2018 IFC Exception: Homes with fire suppression are allowed to have the setback modified to 2’

Structural & loads

Wind Speed: 90

Wind Notes: Exposure Category B

Snow Load: 20

Reducible Snow Load Allowed: 1

Max Attachment Spacing: 96

Structural Notes: When rooftop installations are made on non-engineered trusses, SE will be required EE Always required Wet or Digital. Remember it must be an AZ certified engineer

Minimum Ground On Roof: #10

Electrical

Electrical Load Calcs Required: Derates

Allowed POI: Meter Adapter,Load Side Taps,PV Breaker,Line Side Taps

Panel Schedule Required: Partial Home Backup

Temperature Rating: 90

De Rating Ampacity: 0.91

Battery / ESS

Unique Battery Placards Needed: 0

ESS Notes: Standard

Separate ESS Disconnect Required: ESS Disconnect

ESS Elevation Detail Required: No

Plan set

Plan Set Requirements

A buffering is required between nonresidential uses adjacent to existing or projected residential uses, and between multifamily or alternative living facilities and existing or projected single-family uses, or where there is a transition from one (1) type of use to another use and for screening of mechanical equipment, service or storage areas.

If any equipment is located in the front yard it will need vegetation, Screened Fencing, or something that matches the area so that the equipment is not visible by the public and the owner has approved of it.

AHJ will also need something in writing from the owner of the property signing off on it.

Custom Placards Required: 0

Ground mount

Ground Mount Fencing Required: Mesh/Scrim