City of Pinellas Park (FL)

Florida Authority Having Jurisdiction Solar permitting requirements

NEC Code Version2020

Fire Code Version2018 Building Code

Wet Stamps RequiredDigital Structural,Digital Electrical

Fire Setback Enforced1

Codes

NEC Code Version: 2020

Fire Code Version: 2018 Building Code

Code List

2023 8TH EDITION FLORIDA BUILDING CODE: BUILDING

2023 8TH EDITION FLORIDA BUILDING CODE: RESIDENTIAL

2023 8TH EDITION FLORIDA BUILDING CODE: MECHANICAL

2023 8TH EDITION FLORIDA BUILDING CODE: PLUMBING

2023 8TH EDITION FLORIDA BUILDING CODE: FUEL GAS

2023 8TH EDITION FLORIDA BUILDING CODE: ENERGY CONSERVATION

2023 8TH EDITION FLORIDA BUILDING CODE: EXISTING BUILDING

2023 8TH EDITION FLORIDA BUILDING CODE: ACCESSIBILITY

2023 8TH EDITION FLORIDA FIRE PREVENTION CODE (NFPA)

2020 NATIONAL ELECTRIC CODE (NEC)

ASCE Code Specification: ASCE 7-16

SolarAPP+ & submittal

Revision Required: 1

Rough Inspection: None

New Planset Required For Module Swap: 1

Stamps

Ee Stamp Required On SLD: Yes

Wet Stamps Required: Digital Structural,Digital Electrical

Structural Calculations Required: Yes

Ee Stamp Notes: Digitally Verified Signature

Stamp Location On Plans: Unspecified

Date On Stamps: Expiration Date

Fire setbacks

Fire Setback Enforced: 1

Setback Notes

Standard

36" FIRE ACCESS PATH REQUIRED ON BOTH SIDES OF RIDGE. NOT FEWER THAN 2 PATHWAYS REQUIRED ON SEPARATE ROOF PLANES FROM LOWEST ROOF EDGE TO RIDGE AND NOT LESS THAN 36" WIDE, SHALL BE PROVIDED ON ALL BUILDINGS. FBC R324.6.1

Structural & loads

Wind Speed: 150

Wind Notes: Exposure Category C ; HVHZ

Snow Load: 0

Reducible Snow Load Allowed: 1

Max Attachment Spacing: 48

Structural Notes

SE & EE digital stamps on all PV pages, FL Statute, PE Letter & Calcs. WS 150 MPH Provide u builder cantilever (from engineering report) (a past project DCR) 12/22/20 JM - Max allowable span and max allowable cantilever must be listed on plans

Digitally Verified Signature

"Regarding RAIL overhang, PANEL CANTILEVER in a portrait or landscape layout format. If the Engineer regards these installations as synonymous, A sealed Engineer’s letter stating so."

Minimum Ground On Roof: #10

Electrical

Electrical Load Calcs Required: Derates

Allowed POI: Line Side Taps,PV Breaker,Load Side Taps

Panel Schedule Required: Partial Home Backup

Temperature Rating: 90

De Rating Ampacity: 0.96

Battery / ESS

Unique Battery Placards Needed: 0

ESS Notes: Standard

Separate ESS Disconnect Required: ESS Disconnect

ESS Elevation Detail Required: No

Plan set

Plan Set Requirements: Wind speed needs to be added onto plans,

Roof Plan: Fire setbacks are enforced.

Roof Plan Notes: Layout subject to change.

Attachment Detail: * Provide u builder cantilever (from engineering report) * The max rail overhang in the array installation table must default to 24

Electrical Diagram Notes: Interconnection Method subject to change

Custom Placards Required: 1

Ground mount

Ground Mount Fencing Required: Mesh/Scrim