Liberty Utilities (CA)
Net metering & export
- Net Metering Allowed
- 1
- NEM Type
- Annual
- TOU Utility
- 1
- Post Solar Billing Method
- Net Metering
- Net Excess Generation Notes
If you generate more power than you use during a billing period, your account will earn a credit equal to the power exported (measured in kWh). These credits will be rolled over monthly.
- Rebates Offered
- 0
- Deregulated
- 0
- Allows Standby
- 1
Interconnection & taps
- Approval Req To Install
- Yes
- Interconnection Level
- 3
- Line Taps Allowed
- 0
- Load Taps Allowed
- 0
- Automatic Transformer Upgrade Size
- 0
- Meter Aggregation Allowed
- 1
System size & offset
- System Size Restrictions
- 0
- System Size Restriction Type
- No Restrictions
- System Size Battery Included
- 0
- System Size Includes Existing Systems
- 0
- Offset Type
- Percentage
- Offset Value
- 100
- Offset Calculation Basis
- Historical
- Offset Calculation Period
- 12
- Industry Standard Watts Sqft
- 2
- System Offset Notes
Systems must be designed to offset no more than 100% of annual consumption.
- Offset Calc Tool
- Historical Usage
Metering & disconnect
- Production Meter Required
- No
- Production Meter Position
- N/A
- Production Meter Labeling
- N/A
- Meter Spot Process
Production Meter is required for incentive
A standard meter based socket - (4 jaw)
Temporary Disconnect Reconnect Process (TDR) You will need to contact the planning department and there will be a $50 up/down charge for the service.
TDR - Who to Contact North Lake South Lake
TDR - Applications/Documents Req N/A
TDR - ETA of notice required for request 48 hours
TDR - Who can schedule? Does not matter
TDR - ETA of Utility Scheduling TDR N/A
- Allowed Meter Adapter
- None
Plans & docs
- SLD Reqs
Locate the Utility Source disconnect switch within 10' of the Net Meter
- Install Reqs
A visible disconnect switch is not required for electric panels that have self contained meters. Electric system isolation can be accomplished by pulling the meter out of the socket. Booting the meter or installing a lockable cover plate will occur during isolation
A visible disconnect switch is required for electric panels where the panel contains metering transformers. The disconnect switch shall be furnished and installed by the customer. The device must be accessible to Utility personnel and be capable of being locked in the open position
- Rate Schedule Link
- link
- Website
- link
- Phone
- (530) 543-5216
Other details
- Restrict Inspection
- 0
- Address ID
- 213280
- Express Planset Eligible
- Yes