Fort Valley Utility Commission
Net Metering Allowed1
NEM TypeAnnual
Line Taps Allowed0
Load Taps Allowed0
AC Disconnect RequiredYes
Net metering & export
- Net Metering Allowed
- 1
- NEM Type
- Annual
- TOU Utility
- 0
- Post Solar Billing Method
- Net Metering
- Solar Export Type
- Avoided Cost
- Net Excess Generation Notes
When the billing period kWh’s supplied by the Commission exceeds kWh’s generated by the Customer’s distributed generation, the electricity shall be billed by the Commission in accordance with the applicable tariff(s).
When the billing period kWh’s generated by the Customer’s distributed generation system exceeds kWh’s supplied by the Commission, the Customer shall be billed for appropriate Customer charges for that billing period, and credited for any excess kWh’s generated during the billing period in accordance with the Commission approved Distributed Generation -Renewable Energy Rate.
Upper management approved the activation of the utility for NEM.
- Rebates Offered
- 0
- Deregulated
- 0
Interconnection & taps
- Approval Req To Install
- Yes
- Interconnection Level
- 3
- Line Taps Allowed
- 0
- Load Taps Allowed
- 0
- Automatic Transformer Upgrade Size
- 0
System size & offset
- System Size Restrictions
- 10
- System Size Restriction Type
- AC kW
- System Size Battery Included
- 0
- System Size Includes Existing Systems
- 0
- Offset Type
- No Restrictions
- Offset Value
- 0
- Offset Calculation Period
- 0
- Industry Standard Watts Sqft
- 2
- Offset Calc Tool
- N/A
Metering & disconnect
- Production Meter Required
- No
- AC Disconnect Required
- Yes
- AC Disconnect Labeling
- Visible Lockable Labeled Disconnect
- Allowed Meter Adapter
- None
Plans & docs
- Site Plan Reqs
- A manual, lockable, load-break disconnect switch that provides a clear indication of the switch position must be available with the System at or near the Customer’s main point of service from the Commission’s electric system to provide a point of electrical separation between the Customer’s System and the Commission’s electric system. The disconnect switch must be easily visible, mounted separately from the metering equipment, readily accessible to the Commission personnel at all times, and capable of being locked in the open position with the Commission’s lock.
- SLD Reqs
- AC disconnect required
- Placards
- The Breaker shall be clearly marked to indicate power source and connection to the Commission’s electric system.
- Meter Num Req SLD 3LD
- 0
- ESID Num Req SLD 3LD
- 0
- Website
- link
- Phone
- (478) 825-7701
Other details
- Restrict Inspection
- 0
- Revision Required
- 0
- Mod Swap Requires Planset
- 1
- Address ID
- 209725
- Express Planset Eligible
- Yes