RRE - Raft River Rural Electric Co-op

Net metering & export

Net Metering Allowed

0

TOU Utility

0

Post Solar Billing Method

Export Rate

Solar Export Type

Avoided Cost

Solar Export Rate Approx

0.0146

Solar Export Value Notes

Rates will be reviewed each January and adjusted if needed, based on board approval.

Net Excess Generation Notes

Energy will be paid at the wholesale cost per KWH based on the past calendar years wholesale rate.

Rebates Offered

0

Interconnection & taps

Approval Req To Install

Yes

Interconnection Level

3

Supply Side Taps Allowed

1

Line Taps Allowed

1

Load Taps Allowed

1

Automatic Transformer Upgrade Size

0

Meter Aggregation Allowed

1

System size & offset

System Size Restrictions

0

System Size Restriction Type

No Restrictions

System Size Battery Included

0

System Size Includes Existing Systems

0

Offset Type

Percentage

Offset Value

100

Offset Calculation Basis

Historical

Offset Calculation Period

12

Industry Standard Watts Sqft

2

Offset Calc Tool

N/A

Metering & disconnect

Production Meter Required

No

Production Meter Position

N/A

Production Meter Labeling

N/A

Allowed Meter Adapter

None

Plans & docs

Site Plan Reqs

Proposed location

Details of conditions for the installation and other environmental factors.

Proposed details of interconnection

SLD Reqs

Source of driving energy and anticipated electrical capacity of the system.

Number of phases; manufacturer’s technical data; including control, circuit and safety information

For a 6000 Inverter please use a 40A 2P Breaker. There is a shortage of 35A Breakers - 11.23.20

Electric Service Reqs

Stand-alone meters must receive an MPU in Utah

Phases:

Systems may be single or three phase except where single phase will cause unacceptable imbalance or three phase interconnection is not reasonably available.

Safety Considerations for systems 10kW and less:

The owner’s system shall be protected so that a short circuit due to any cause, will not damage the generator or any of its equipment.

In the event the Utility’s source of energy is lost the generating system must be electronically disconnected from the Cooperative’s lines until the source can be reestablished.

Safety Considerations for systems 10kW or more:

Phase failure/reversal and voltage imbalance protection must be provided by the owner.

A disconnect that the Cooperative can control just be provided which will allow the Cooperative to lock the generator off the distribution lines.

In the event the Cooperative’s source of energy is lost, the generating system must be electrically disconnected from the Cooperative’s lines until the source can be reestablished.

Taps:

Line and Load Side Taps allowed

Supply Side Taps

Rate Schedule Link

link

Website

link

Phone

(208) 645-2211

Other details

Restrict Inspection

0

Revision Required

1

Mod Swap Requires Planset

1

Address ID

108112

Express Planset Eligible

Yes