SHELD - South Hadley Electric Light
Spot something wrong?
Tariffs and interconnection rules move often. If something here is out of date or missing, tell us and we'll fix it.
Report a correction Net Metering AllowedYes
NEM TypeMonthly
Line Taps AllowedNo
Load Taps AllowedNo
Net metering & export
- Net Metering Allowed
- Yes
- NEM Type
- Monthly
- TOU Utility
- No
- Post Solar Billing Method
- Net Metering
- Rebates Offered
- No
- Deregulated
- Yes
Interconnection & taps
- Approval Req To Install
- Yes
- Line Taps Allowed
- No
- Load Taps Allowed
- No
- Automatic Transformer Upgrade Size
- 0
- Meter Aggregation Allowed
- No
System size & offset
- System Size Restrictions
- 0
- System Size Restriction Type
- No Restrictions
- System Size Battery Included
- No
- System Size Includes Existing Systems
- No
- Offset Type
- No Restrictions
- Offset Value
- 0
- Offset Calculation Period
- 0
- Industry Standard Watts Sqft
- 2
Metering & disconnect
- Production Meter Required
- Yes
- Production Meter Position
- Inv-Disco-PM-POI
- Allowed Meter Adapter
- None
Plans & docs
- Site Plan Reqs
The site plan should show the proposed physical location of all system components, as well as the PV panel azimuth and tilt angles
- SLD Reqs
Meter Orientation = Over/Under
- PV meter wired top toward inverter, bottom toward POI
- AC disconnect switch must be installed in a readily accessible location normally within 10 feet of the utility meter, where SHELD personnel can operate the switch at any time.
- Electric Service Reqs
The proposed inverter settings should include; how the inverter reacts to high/low voltage conditions; voltage and frequency ride-thru settings; volt-var or volt-watt settings.
For Equipment and System Design: Please refer to pg. 1-2 in PV Interconnection Requirements
- Install Reqs
Residential Class Customer PV Installations: Residential rate customers (e.g. R1 and RH) with PV installed systems shall not exceed 10 kW DC
- Website
- link
- Phone
- (413) 536-1050