Edmond Electric (City of Edmond)
Spot something wrong?
Tariffs and interconnection rules move often. If something here is out of date or missing, tell us and we'll fix it.
Report a correctionNet metering & export
- Net Metering Allowed
- Yes
- NEM Type
- Monthly
- TOU Utility
- No
- Post Solar Billing Method
- Net Metering
- Net Excess Generation Notes
The received kWh will be deducted from the delivered kWh, if the result is negative OR zero the customer will only pay the monthly charge + applicable tax. No credit will be given for excess generation supplied back to the Edmond Electric
distribution system from the Customer’s distributed generation system
- Rebates Offered
- No
- Deregulated
- Yes
- Allows Standby
- No
Interconnection & taps
- Approval Req To Install
- No
- Line Taps Allowed
- No
- Load Taps Allowed
- No
- Automatic Transformer Upgrade Size
- 0
- Meter Aggregation Allowed
- No
System size & offset
- System Size Restrictions
- 10
- System Size Restriction Type
- AC kW
- System Size Battery Included
- No
- System Size Includes Existing Systems
- No
- Offset Value
- 0
- Offset Calculation Period
- 0
- Industry Standard Watts Sqft
- 2
- System Offset Notes
10 kW AC max for Residential projects
- Offset Calc Tool
- N/A
Metering & disconnect
- Production Meter Required
- No
- Production Meter Position
- N/A
- Production Meter Labeling
- N/A
- AC Disconnect Required
- Yes
- AC Disconnect Labeling
- Visible Lockable Labeled Disconnect
Plans & docs
- Site Plan Reqs
(SYSTEM LAYOUT):
 SHOW LOCATION OF DISCONNECTS AND INVERTERS
 SHOW LOCATION OF ALL MODULES AND ALL BATTERIES
 SHOW LOCATION AND CONNECTION OF ALL GROUNDING ELECTRODE CONDUCTORS
 SHOW LOCATION OF THE EQUIPMENT WITHIN THE STRUCTURE
(SITE PLAN):
 PROVIDE DIMENSIONS OF CLEARANCES AROUND ALL EQUIPMENT
 PROVIDE DIMENSIONS BETWEEN EQUIPMENT AND STRUCTURES
 PROVIDE DIMENSIONS FROM EQUIPMENT TO PROPERTY LINES
- SLD Reqs
(SYSTEM DESIGN):
 MANUFACTURER’S CUT SHEETS
 ELECTRICAL PLANS
 CALCULATIONS USED TO DETERMINE WIRE SIZES, FUSE AND BREAKER TYPE AND SIZING:
INCLUDING TEMPERATURE DERATION FACTORS PER THE NEC TABLE 690.31©.
 ROOF MOUNTED SYSTEMS SHOULD USE THE WORST-CASE SCENARIO FOR AMBIENT TEMPERATURE OF 56-60 DEGREES C.
SEE NEC TABLES 310.15 (B)(2)(A); (B)(3)(A) & (B)(3)(C).
- Equipment Approvals
- California Energy Commission
- Meter Num Req SLD 3LD
- No
- ESID Num Req SLD 3LD
- No
- Rate Schedule Link
- link
- Website
- link
- Phone
- (405) 359-4780
Other details
- Revision Required
- Yes
- Mod Swap Requires Planset
- Yes