Horry Electric Cooperative, Inc
Net Metering Allowed0
Line Taps Allowed0
Load Taps Allowed0
Net metering & export
- Net Metering Allowed
- 0
- TOU Utility
- 0
- Post Solar Billing Method
- Export Rate
- Solar Export Type
- Fixed kWh
- Solar Export Rate
- 0.03284
- Solar Export Value Notes
- Can change without prior notice - Annually or bi-annually
- Net Excess Generation Notes
Excess generation is defined as the kWh that was exported to the utility that wasn't used during the day (when electricity was generated),the coop will purchase the excess kWh at a fixed rate which will then show as credit in the customer's utility bill. It is extremely rare for the customer to have a negative energy charge, but if they do have then the credit (in $) will rollover to the next month's bill.
- Rebates Offered
- 0
- Allows Standby
- 1
Interconnection & taps
- Approval Req To Install
- Yes
- Interconnection Level
- 3
- Line Taps Allowed
- 0
- Load Taps Allowed
- 0
- Automatic Transformer Upgrade Size
- 0
System size & offset
- System Size Restrictions
- 0
- System Size Restriction Type
- No Restrictions
- System Size Battery Included
- 0
- System Size Includes Existing Systems
- 0
- Offset Type
- No Restrictions
- Offset Value
- 0
- Offset Calculation Period
- 0
- Industry Standard Watts Sqft
- 2
- System Offset Notes
No sizing limitation (up to 2 MW) but if the project triggers a Transformer Upgrade, then it will be the customer's responsibility to install the transformer. It will be an on-site transformer isolated from the rest of the members.
Metering & disconnect
- Production Meter Required
- No
- Production Meter Position
- N/A
- Production Meter Labeling
- N/A
- Allowed Meter Adapter
- None
Plans & docs
- SLD Reqs
- A manual load-break disconnect switch or safety switch with a clear visible indication of switch position between the CES (Cooperative’s Electric System)and the Distributed Resource.
- The switch must have pad lock provisions for locking in the open position. The switch must be visible to, and accessible to Cooperative personnel.
- The switch must be in close proximity, and visible from, the Member’s point of common coupling with the CES.
- The switch must be labeled “Generator Disconnect Switch”.
- The switch may isolate the Distributed Resource system and its associated load from the CES or disconnect only the Distributed Resource from the CES.
- Website
- link
- Phone
- (843) 369-2211
Other details
- Restrict Inspection
- 0
- Revision Required
- 1
- Mod Swap Requires Planset
- 1
- Address ID
- 165067
- Express Planset Eligible
- Yes