Little River Electric

Net metering & export

Net Metering Allowed

1

NEM Type

Annual

TOU Utility

0

Post Solar Billing Method

Net Metering

Net Excess Generation Notes

"Excess energy not used in the current billing month to reduce billed kilowatt-hour usage shall be

accumulated and used to reduce usage in future months; however, any accumulated excess

energy not used to reduce billed kilowatt-hour usage shall be reset to zero each June Excess

energy delivered prior to June 1 will only be used to reduce usage provided by the Cooperative

prior to June 1"

Rebates Offered

0

Deregulated

1

Allows Standby

1

Interconnection & taps

Approval Req To Install

Yes

Interconnection Level

3

Line Taps Allowed

0

Load Taps Allowed

0

Automatic Transformer Upgrade Size

0

Meter Aggregation Allowed

1

System size & offset

System Size Restrictions

20

System Size Restriction Type

AC kW

System Size Battery Included

0

System Size Includes Existing Systems

0

Offset Type

No Restrictions

Offset Value

0

Offset Calculation Period

0

Industry Standard Watts Sqft

2

Inverter Oversize Restrictions

0

System Offset Notes

20kw residential max

Offset Calc Tool

PV Watts

Metering & disconnect

Production Meter Required

No

Production Meter Position

N/A

Production Meter Labeling

N/A

Meter Spot Process

Contact the cooperative directly to schedule a TDR, no fees specified from Rep

Allowed Meter Adapter

None

Plans & docs

Install Reqs

Contact the cooperative directly to schedule a TDR, no fees specified from Rep "The installation of the Distributed Resource and all equipment in the system must comply with the latest published edition of IEEE 929 and IEEE 1547 as applicable. All installed wiring, protection devices, cabinets and connectors, etc. must comply with the latest published edition of the NEC as used by the local jurisdiction and all applicable local codes. An approved electrical

inspection by the authority having jurisdiction is required. Member shall install a manual load-break disconnect switch with a clear visible indication of switch position between Cooperative’s electric system and Member’s Distributed Resource. The Isolation Device shall be installed as specified in the Interconnection Standard."

Utility Inspection Required: Yes

Placards

"Member will install a permanent warning label in a conspicuous place in close proximity to the electric meter or on the meter base to notify them personnel that there is a generator installed on the load side of the meter. The warning label shall not be placed in a

location that would interfere with the ability of Cooperative personnel to read the electric meter. Member shall also place a warning label on the Isolation Device. Cooperative will provide the warning labels to Member. The warning labels must be in place before the Distributed Resource can be interconnected with Cooperative’s system."

Equipment Approvals

California Energy Commission

Rate Schedule Link

link

Website

link

Phone

(800) 459-2141

Other details

Restrict Inspection

0

Revision Required

1

Mod Swap Requires Planset

1

Address ID

165099

Express Planset Eligible

Yes