YEC - York Electric Cooperative, Inc

Net metering & export

Net Metering Allowed

1

NEM Type

Annual

TOU Utility

0

Post Solar Billing Method

Net Metering

Net Excess Generation Notes

Excess Generation will be credited monthly by an amount per kWh (4.79 cents). Cooperative shall review the Value of Renewable Generation at least annually to ensure credit reflects the appropriate costs. If the credit is larger than the energy bill, the remaining credit will be retained to offset charges in future billing periods.

Rebates Offered

0

Deregulated

1

Allows Standby

1

Interconnection & taps

Approval Req To Install

Yes

Interconnection Level

1

Line Taps Allowed

0

Load Taps Allowed

0

Automatic Transformer Upgrade Size

0

System size & offset

System Size Restrictions

20

System Size Restriction Type

AC kW

System Size Battery Included

0

System Size Includes Existing Systems

0

Offset Type

Combination

Offset Value

100

Offset Calculation Basis

Historical

Offset Calculation Period

12

Industry Standard Watts Sqft

2

Inverter Oversize Restrictions

1

System Offset Notes

The Nameplate Rating of the member’s installed generation system and equipment must not exceed the lesser of the Member’s actual or estimated maximum annual non-coincidental demand (kW) for the last twelve (12) months or 20 kW or less for residential members and 100 kW or less for nonresidential members.

Offset Calc Tool

PV Watts

Metering & disconnect

Production Meter Required

No

Production Meter Position

N/A

Production Meter Labeling

N/A

Allowed Meter Adapter

None

Plans & docs

Install Reqs

Utility Inspection Required: Yes

Construct the power generating installation system and install a disconnect switch in close proximity to the meter,

warning/safety labels, and other protective equipment as required by IEEE, NEC latest published edition, Facilities and

Operations. A manual load-break disconnect switch or safety switch with a clear visible indication of switch position between the Area EPS and the Generator. The switch must have pad lock provisions for locking in the open position. The switch must be visible to, and accessible to Company personnel. The switch must be in close proximity, and visible from, the Member’s point of electrical interconnection with the Company’s Area EPS. The switch must be labeled “Generator Disconnect Switch”. The switch may isolate the Generator system and its associated load from the area EPS or disconnect only the Generator from the Area EPS."

Placards

"Member will install a permanent warning label in a conspicuous place in close proximity to the electric meter or on the meter base to notify them personnel that there is a generator installed on the load side of the meter. The warning label shall not be placed in a

location that would interfere with the ability of Cooperative personnel to read the electric meter. Member shall also place a warning label on the Isolation Device. Cooperative will provide the warning labels to Member. The warning labels must be in place before the Distributed Resource can be interconnected with Cooperative’s system."

Equipment Approvals

California Energy Commission

Rate Schedule Link

link

Website

link

Phone

(803) 684-4248

Other details

Restrict Inspection

0

Revision Required

1

Mod Swap Requires Planset

1

Address ID

166284

Express Planset Eligible

Yes