Bountiful City Utilities

Net metering & export

Net Metering Allowed

No

NEM Type

Annual

TOU Utility

Yes

Post Solar Billing Method

Feed-in-Tariff

Net Excess Generation Notes

As measured in KWH, the energy generated by the Feed-In Tariff Customer’s power generating equipment will be credited at the applicable time of day rates and then applied to reduce to the Customer’s monthly bill after the calculation of the Customer’s usage. Any Energy Credit in excess of the Customer’s Energy Charges will be used to offset other charges on that month’s bill. On April 1st of every year, BCLP will pay Feed-In Tariff Customers for any net credit owed to them by BCLP and the Customer’s credit balance will be returned to zero

Rebates Offered

No

Deregulated

No

Interconnection & taps

Approval Req To Install

Yes

Supply Side Taps Allowed

No

Line Taps Allowed

No

Load Taps Allowed

No

Automatic Transformer Upgrade Size

0

System size & offset

System Size Battery Included

No

System Size Includes Existing Systems

No

Offset Value

0

Offset Calculation Period

0

Industry Standard Watts Sqft

2

System Offset Notes

For residential single-phase customers, the maximum allowable photovoltaic system size is 10 kW.

Metering & disconnect

Allowed Meter Adapter

None

Plans & docs

Site Plan Reqs

" Plan view (bird’s-eye) of site with placement of solar panels.

 A north arrow, the scale of the drawing, and the date of the drawing.

 Street names and addresses.

FOR GROUND-MOUNTED SOLAR ARRAYS, THE FOLLOWING:

 Property lines with dimensions.

 All sidewalks, driveways, curbs and gutter, and parking areas.

 All existing easements, rights-of-way, and any other restrictions on the use of the

property.

 Existing buildings, proposed buildings, and other significant features on the site.

 Existing buildings and significant features located on adjacent properties within 50 feet

(50’) of the subject property boundaries.

 When required by the City Planner or City Engineer, and for all new construction, a

survey including both existing and proposed contours of the land at intervals of two

feet (2’) or better. "

SLD Reqs

The customer is required to provide and install meter bases in-line between the inverter disconnect switch and the customer's service entrance cable. BCL&P will provide the meters and will monitor the total electrical generation of the photovoltaic system. The location of the meter bases for the Feed In Tariff Production Meters must be approved by BCL&P prior to construction.

"Please, Power will

stamp the diagram. Please include the stamped diagram with your solar application."

Install Reqs

The customer is required to furnish and install the photovoltaic meter base and the photovoltaic disconnect switch, in addition to the electric service meter, according to all applicable codes. The customer is required to keep the area in front of and immediately around the meters and the disconnect switch clear and accessible to allow maintenance and reading of the meters.

Equipment Approvals

California Energy Commission

Label Page Notes

Reference Utah Labels block

Website

link