LL&P - Logan Light & Power
Spot something wrong?
Tariffs and interconnection rules move often. If something here is out of date or missing, tell us and we'll fix it.
Report a correction Net Metering AllowedYes
Line Taps AllowedNo
Load Taps AllowedNo
Net metering & export
- Net Metering Allowed
- Yes
- Rebates Offered
- No
Interconnection & taps
- Approval Req To Install
- Yes
- Line Taps Allowed
- No
- Load Taps Allowed
- No
- Automatic Transformer Upgrade Size
- 0
System size & offset
- System Size Battery Included
- No
- System Size Includes Existing Systems
- No
- Offset Value
- 0
- Offset Calculation Period
- 0
- Industry Standard Watts Sqft
- 2
- Offset Calc Tool
- N/A
Plans & docs
- Site Plan Reqs
- All datasheets for the proposed equipment (solar panels, inverters, cable, etc...) must be included in the application as well as a structural load design and letter from a structural engineer licensed in the State of Utah.
- SLD Reqs
- This document must indicate the location of the solar electric modules, inverter, batteries (if any), lockable disconnect switch, and point of connection with the utility system. All electrical equipment specifications and calculations must be shown on the one-line. Any signs/labels should be shown with their respective calculated values on the one-line. The installation address, current account number at that address, and the installer's name and telephone number must also be included.
- Install Reqs
- Utility- Accessible AC Disconnect Switch Location (should be within sight and within 3 feet of bidirectional meter when possible all other locations must be approved by Logan City Light &Power) The Production meter shall be located on the exterior of the building within 10 feet of the bi-directional meter. In addition, the production meter socket, for residential installation, shall be a Milbank 125-Amp Ringless Single Phase (120/240) or equivalent Meter Socket.
- Website
- link
- Phone
- (435) 716-9700