Lakeview Light & Power
Net metering & export
- Net Metering Allowed
- 1
- NEM Type
- Annual
- TOU Utility
- 0
- Post Solar Billing Method
- Net Metering
- Net Excess Generation Notes
If the electricity generated by the Member and distributed back to LLP during the billing period, exceeds the electricity supplied by LLP, then the Member shall be: (1) billed for the appropriate Member service charge as other Members of LLP in the same
rate class; and (2) credited for the net excess kilowatt-hours generated during the billing period, with this kilowatt-hour credit appearing on Member's bill. Any residual net generation on the member's account shall be used on or before March 31st. Any remaining unused credits during the previous year shall be granted to the electric utility without any compensation to the Generator, in accordance with RCW 80.60.
- Rebates Offered
- 0
- Deregulated
- 0
- Allows Standby
- 0
Interconnection & taps
- Approval Req To Install
- Yes
- Interconnection Level
- 3
- Line Taps Allowed
- 0
- Load Taps Allowed
- 0
- Automatic Transformer Upgrade Size
- 0
- Meter Aggregation Allowed
- 0
System size & offset
- System Size Restrictions
- 100
- System Size Restriction Type
- AC kW
- System Size Battery Included
- 0
- System Size Includes Existing Systems
- 0
- Offset Value
- 0
- Offset Calculation Period
- 0
- Industry Standard Watts Sqft
- 2
- System Offset Notes
Sizing requirement: Not heavily enforced but it's preferred to 100% offset or 100 kW AC (whichever is less). The utility does NOT purchase excess energy, and any excess energy after March 31 of each year will be eliminated.
- Offset Calc Tool
- Historical Usage
Metering & disconnect
- Production Meter Required
- No
- AC Disconnect Required
- Yes
- AC Disconnect Labeling
- Visible Lockable Labeled Disconnect
Plans & docs
- Site Plan Reqs
Not required for IX submittals
- SLD Reqs
Standard - See example uploaded
- Electric Service Reqs
IEEE 1547-2018
UL 1741
IEEE 929-2000
- Install Reqs
Disconnect switch required
- shall be accessible on the exterior of the building and be accessible to utility personnel at all times.
- Must be a visible break type in a metal enclosure, which can be secured by a padlock.
- Placards
Common labeling furnished or approved by LLP and in accordance with NEC requirements must be posted on meter base, disconnects, and transformers informing working personnel that generation is operating at or is located on the premises.
- Electrical Stamp Required
- 0
- Equipment Approvals
- California Energy Commission
- Meter Num Req SLD 3LD
- 0
- ESID Num Req SLD 3LD
- 0
- Rate Schedule Link
- link
- Website
- link
- Phone
- (253) 584-6060
Other details
- Restrict Inspection
- 0
- Revision Required
- 1
- Mod Swap Requires Planset
- 1
- Address ID
- 5412048
- Express Planset Eligible
- Yes